Integrated Full-Length Transcriptomics and Metabolomics Reveal Glycosyltransferase Involved in the Biosynthesis of Flavonol Glycosides in Laportea bulbifera.

Many species of the Urticaceae family are important cultivated fiber plants that are known for their economic and industrial values. However, their secondary metabolite profiles and associated biosynthetic mechanisms have not been well-studied. Using Laportea bulbifera as a model, we conducted widely targeted metabolomics, which revealed 523 secondary metabolites, including a unique accumulation of flavonol glycosides in bulblet. Through full-length transcriptomic and RNA-seq analyses, the related genes in the flavonoid biosynthesis pathway were identified. Finally, weighted gene correlation network analysis and functional characterization revealed four LbUGTs, including LbUGT78AE1, LbUGT72CT1, LbUGT71BX1, and LbUGT71BX2, can catalyze the glycosylation of flavonol aglycones (kaempferol, myricetin, gossypetin, and quercetagetin) using UDP-Gal and UDP-Glu as the sugar donors. LbUGT78AE1 and LbUGT72CT1 showed substrate promiscuity, whereas LbUGT71BX1 and LbUGT71BX2 exhibited different substrate and sugar donor selectivity. These results provide a genetic resource for studying Laportea in the Urticaceae family, as well as key enzymes responsible for the metabolism of valuable flavonoid glycosides.

Transcriptomic and metabolomic profiling provide insight into the role of sugars and hormones in leaf senescence of Pinellia ternata.

KEY MESSAGE: The interaction network and pathway map uncover the potential crosstalk between sugar and hormone metabolisms as a possible reason for leaf senescence in P. ternata. Pinellia ternata, an environmentally sensitive medicinal plant, undergoes leaf senescence twice a year, affecting its development and yield. Understanding the potential mechanism that delays leaf senescence could theoretically decrease yield losses. In this study, a typical senescent population model was constructed, and an integrated analysis of transcriptomic and metabolomic profiles of P. ternata was conducted using two early leaf senescence populations and two stay-green populations. The result showed that two key gene modules were associated with leaf senescence which were mainly enriched in sugar and hormone signaling pathways, respectively. A network constructed by unigenes and metabolisms related to the obtained two pathways revealed that several compounds such as D-arabitol and 2MeScZR have a higher significance ranking. In addition, a total of 130 hub genes in this network were categorized into 3 classes based on connectivity. Among them, 34 hub genes were further analyzed through a pathway map, the potential crosstalk between sugar and hormone metabolisms might be an underlying reason of leaf senescence in P. ternata. These findings address the knowledge gap regarding leaf senescence in P. ternata, providing candidate germplasms for molecular breeding and laying theoretical basis for the realization of finely regulated cultivation in future.

Whole-genome sequencing in medicinal plants: current progress and prospect.

Advancements in genomics have dramatically accelerated the research on medicinal plants, and the development of herbgenomics has promoted the "Project of 1K Medicinal Plant Genome" to decipher their genetic code. However, it is difficult to obtain their high-quality whole genomes because of the prevalence of polyploidy and/or high genomic heterozygosity. Whole genomes of 123 medicinal plants were published until September 2022. These published genome sequences were investigated in this review, covering their classification, research teams, ploidy, medicinal functions, and sequencing strategies. More than 1,000 institutes or universities around the world and 50 countries are conducting research on medicinal plant genomes. Diploid species account for a majority of sequenced medicinal plants. The whole genomes of plants in the Poaceae family are the most studied. Almost 40% of the published papers studied species with tonifying, replenishing, and heat-cleaning medicinal effects. Medicinal plants are still in the process of domestication as compared with crops, thereby resulting in unclear genetic backgrounds and the lack of pure lines, thus making their genomes more difficult to complete. In addition, there is still no clear routine framework for a medicinal plant to obtain a high-quality whole genome. Herein, a clear and complete strategy has been originally proposed for creating a high-quality whole genome of medicinal plants. Moreover, whole genome-based biological studies of medicinal plants, including breeding and biosynthesis, were reviewed. We also advocate that a research platform of model medicinal plants should be established to promote the genomics research of medicinal plants.

Exosomes in lung cancer metastasis, diagnosis, and immunologically relevant advances.

Lung cancer is a chronic wasting disease with insidious onset and long treatment cycle. Exosomes are specialized extracellular vesicles, at first exosomes were considered as a transporter of cellular metabolic wastes, but recently many studies have identified exosomes which contain a variety of biologically active substances that play a role in the regulation of cellular communication and physiological functions. Exosomes play an important role in the development of lung cancer and can promote metastasis through a variety of mechanisms. However, at the same time, researchers have also discovered that immune cells can also inhibit lung cancer through exosomes. In addition, researchers have discovered that some specific miRNAs in exosomes can be used as markers for early diagnosis of lung cancer. Engineering exosomes may be one of the strategies to enhance the clinical translational application of exosomes in the future, for example, strategies such as modifying exosomes to enhance targeting or utilizing exosomes as carriers for drug delivery have been explored. but more studies are needed to verify the safety and efficacy. This article reviews the latest research on exosomes in the field of lung cancer, from the mechanism of lung cancer development, the functions of immune cell-derived exosomes and tumor-derived exosomes, to the early diagnosis of lung cancer.

Comparative and phylogenetic analysis of complete chloroplast genome sequences of Salvia regarding its worldwide distribution.

Salvia is widely used as medicine, food, and ornamental plants all over the world, with three main distribution centers, the Central and western Asia/Mediterranean (CAM), the East Aisa (EA), and the Central and South America (CASA). Along with its large number of species and world-wide distribution, Salvia is paraphyletic with multiple diversity. Chloroplast genomes (CPs) are useful tools for analyzing the phylogeny of plants at lower taxonomic levels. In this study, we reported chloroplast genomes of five species of Salvia and performed phylogenetic analysis with current available CPs of Salvia. Repeated sequence analysis and comparative analysis of Salvia CPs were also performed with representative species from different distribution centers. The results showed that the genetic characters of the CPs are related to the geographic distribution of plants. Species from CAM diverged first to form a separate group, followed by species from EA, and finally species from CASA. Larger variations of CPs were observed in species from CAM, whereas more deficient sequences and less repeated sequences in the CPs were observed in species from CASA. These results provide valuable information on the development and utilization of the worldwide genetic resources of Salvia.

Identification and Quantitation of the Bioactive Components in Wasted Aralia elata Leaves Extract with Endothelial Protective Activity.

Aralia elata, a renowned medicinal plant with a rich history in traditional medicine, has gained attention for its potential therapeutic applications. However, the leaves of this plant have been largely overlooked and discarded due to limited knowledge of their biological activity and chemical composition. To bridge this gap, a comprehensive study was conducted to explore the therapeutic potential of the 70% ethanol extract derived from Aralia elata leaves (LAE) for the treatment of cardiovascular disease (CVD). Initially, the cytotoxic effects of LAE on human umbilical vein endothelial cells (HUVECs) were assessed, revealing no toxicity within concentrations up to 5 µg/mL. This suggests that LAE could serve as a safe raw material for the development of health supplements and drugs aimed at promoting cardiovascular well-being. Furthermore, the study found that LAE extract demonstrated anti-inflammatory properties in HUVECs by modulating the PI3K/Akt and MAPK signaling pathways. These findings are particularly significant as inflammation plays a crucial role in the progression of CVD. Moreover, LAE extract exhibited the ability to suppress the expression of adhesion molecules VCAM-1 and ICAM-1, which are pivotal in leukocyte migration to inflamed blood vessels observed in various pathological conditions. In conjunction with the investigation on therapeutic potential, the study also established an optimal HPLC-PDA-ESI-MS/MS method to identify and confirm the chemical constituents present in 24 samples collected from distinct regions in South Korea. Tentative identification revealed the presence of 14 saponins and nine phenolic compounds, while further analysis using PCA and PLS-DA allowed for the differentiation of samples based on their geographical origins. Notably, specific compounds such as chlorogenic acid, isochlorogenic acid A, and quercitrin emerged as marker compounds responsible for distinguishing samples from different regions. Overall, by unraveling its endothelial protective activity and identifying key chemical constituents, this research not only offers valuable insights for the development of novel treatments but also underscores the importance of utilizing and preserving natural resources efficiently.

DNA barcoding in herbal medicine: Retrospective and prospective.

DNA barcoding has been widely used for herb identification in recent decades, enabling safety and innovation in the field of herbal medicine. In this article, we summarize recent progress in DNA barcoding for herbal medicine to provide ideas for the further development and application of this technology. Most importantly, the standard DNA barcode has been extended in two ways. First, while conventional DNA barcodes have been widely promoted for their versatility in the identification of fresh or well-preserved samples, super-barcodes based on plastid genomes have rapidly developed and have shown advantages in species identification at low taxonomic levels. Second, mini-barcodes are attractive because they perform better in cases of degraded DNA from herbal materials. In addition, some molecular techniques, such as high-throughput sequencing and isothermal amplification, are combined with DNA barcodes for species identification, which has expanded the applications of herb identification based on DNA barcoding and brought about the post-DNA-barcoding era. Furthermore, standard and high-species coverage DNA barcode reference libraries have been constructed to provide reference sequences for species identification, which increases the accuracy and credibility of species discrimination based on DNA barcodes. In summary, DNA barcoding should play a key role in the quality control of traditional herbal medicine and in the international herb trade.

Effects of porous structure on the deformation failure mechanism of cement sheaths for wellbores.

The influence and mechanism of porous structure on the deformation failure of cement sheaths under hydraulic pressure is still unclear. To solve this problem, a net slurry cement sheath and a liquid silicon cement sheath were prepared by using a cement material and a liquid silicon suspension. The distributions of the pore radius and spatial location were analyzed using computed tomography scanning and statistics to obtain their probability density distribution functions. Based on the distribution functions, the single-layer and double-layer porous reconstruction models of the net slurry cement sheath and liquid silicon cement sheath were constructed using a FLAC 3D program. A series of numerical simulations were conducted to study the deformation failure of the cement sheaths under in situ stress and hydraulic pressure. The effects of the porous and double-layer structures on the breakdown pressure, plastic failure zone, radial deformation, and stress distribution of the cement sheaths were analyzed. As a result, the mechanisms for the influence of the porous and double-layer structures on the failure mode, failure path, and interaction between the cement sheath and metal casing were revealed. The results of this research provide a theoretical basis for an in-depth understanding of the failure mechanisms of porous cement sheaths.

An ultrasensitive electrochemical sensor for phospholipase C via signal amplification based on breathing ATRP and its application.

Phospholipase C (PLC) has important biological functions in specific cancer types, immune disorders and neurodegeneration. Here, an ultrasensitive electrochemical sensor for PLC was developed via signal amplification based on breathing atom transfer radical polymerization (ATRP). First, phosphatidylethanolamine (PE) was immobilized on the surface of a gold electrode by L-cysteine and cross-linker. Then, PE was specially hydrolyzed by PLC to obtain the phosphate groups and tethered with the ATRP initiator α-bromophenacetic acid (BPAA) by the coordination action of Zr4+. After the breathing ATRP, a large number of electroactive monomers (ferrocenylmethyl methacrylate, FcMMA) were successfully grafted from BPAA. The experimental results indicated that the detection signal of the obtained electrode (sensor) was proportional to the concentration of PLC. The sensor showed a low detection limit of 0.270 U L-1 and a wide linear range of 1-40 U L-1 (R2 = 0.997). Most importantly, the sensor was successfully applied to detect PLC in breast cancer cells (MCF-7, MDA-MB-231) and nontumor cells (MCF-10A). The value obtained by our electrochemical sensor had no obvious difference from that determined by the commercial ELISA kit. These results showed that the fabricated PLC sensor had acceptable potential in clinical applications.

Physiological and transcriptional responses to heat stress in a typical phenotype of Pinellia ternata.

Pinellia ternata is an important medicinal plant, and its growth and development are easily threatened by high temperature. In this study, comprehensive research on physiological, cytological and transcriptional responses to different levels of heat stress were conducted on a typical phenotype of P. ternata. First, P. ternata exhibited tolerance to the increased temperature, which was supported by normal growing leaves, as well as decreased and sustained photosynthetic parameters. Severe stress aggravated the damages, and P. ternata displayed an obvious leaf senescence phenotype, with significantly increased SOD and POD activities (46% and 213%). In addition, mesophyll cells were seriously damaged, chloroplast thylakoid was fuzzy, grana lamellae and stroma lamellae were obviously broken, and grana thylakoids were stacked, resulting in a dramatically declined photosynthetic rate (74.6%). Moreover, a total of 16 808 genes were significantly differential expressed during this process, most of which were involved in photosynthesis, transmembrane transporter activity and plastid metabolism. The number of differentially expressed transcription factors in MYB and bHLH families was the largest, indicating that these genes might participate in heat stress response in P. ternata. These findings provide insight into the response to high temperature and facilitate the standardized cultivation of P. ternata.

Sustained Improvement of Appropriateness in Surgical Antimicrobial Prophylaxis with the Application of Quality Control Circle.

Purpose: Quality control circle (QCC) has acquired success in many fields in healthcare industry as a process management tool, whereas its efficacy in surgical antimicrobial prophylaxis (SAP) remains unknown. This study aimed to implement QCC interventions to improve the appropriateness of SAP. Methods: A QCC activity team was established to grasp the current situation of SAP in clean surgery procedure, set target, formulate corresponding countermeasures and implement and review them in stages. The plan-do-check-act (PDCA) method was cyclically applied. Results: The appropriateness of antibiotic prophylaxis before (January to December 2020) and after (January to December 2021) the implementation of QCC activities were evaluated based on relevant international and Chinese SAP guidelines. The overall SAP appropriateness was significantly improved from 68.72% before QCC to 93.7% post QCC implementation (P<0.01). A significant improvement (P<0.05) was also determined for each category: selection (from 78.82% to 96.06%), duration (from 90.15% to 96.46%), indication (from 94.09% to 97.64%), timing of first dose (from 96.55% to 99.21%), antimicrobial usage (from 96.8% to 99.41%), re-dosing of antimicrobial (from 96.55% to 99.21%). Conclusion: Implementation of a QCC program can optimize the use of antibiotics and improve the appropriateness of SAP and is of practical importance to their standardization.

Light calcium carbonate improves pullulan biosynthesis by Aureobasidium pullulans under high concentration of sugar.

The effects of light calcium carbonate (CaCO3) on pullulan biosynthesis by Aureobasidium pullulans NCPS2016 were investigated. Light CaCO3 enhanced pullulan production by 12.4 % when added to the low concentration of fructose broth compared with K2HPO4. Pullulan production was further improved when increasing both the concentrations of light CaCO3 and fructose. Compared to K2HPO4, light CaCO3 improved the activities of UDP-glucose pyrophosphorylase, α-phosphoglucose mutase, UDP-glucosyltransferase, and glucosyltransferase relevant to pullulan biosynthesis, and the gene transcriptional levels of UDP-glucose pyrophosphorylase, α-phosphoglucose mutase, UDP-glucosyltransferase, and glucose kinase were enhanced. During 30-liter fermentation, 144.3 g/L of purified pullulan was produced from 200 g/L of fructose and 15 g/L of light CaCO3 within 168 h, with the yield and productivity of 0.72 g/g and 0.86 g/L/h respectively. This is the first report that light CaCO3 improves pullulan production significantly.

High-level production of pullulan from high concentration of glucose by mutagenesis and adaptive laboratory evolution of Aureobasidium pullulans.

The cost of carbon sources and the low efficiency of the fermentation titer limit the industrial application of pullulan. In this study, a hypertonic-tolerant strain with efficient utilization of glucose was obtained using a double strategy. Initially, a strain for efficient synthesis of pullulan from glucose was generated by mutagenesis. Subsequently, the mutant was directionally evolved on the plate containing a high glucose concentration to enhance high osmotic resistance. The enzyme activities and the transcriptional levels involved in pullulan biosynthesis and high osmotic tolerance in mutants were increased. Nitrogen source and inorganic salts also significantly affected the production of pullulan by M233-20 from high concentration of glucose. The pullulan titer of 162.1 g/L was obtained using the response surface methodology in the flask. The strain M233-20 produced 162.3 g/L pullulan in a 30-L bioreactor with a yield of 0.82 g/g glucose. Hence, this work provides a potential industrial pullulan producer M233-20 and a strategy to develop excellent strain.

[Comprehensive evaluation of Pinellia ternata germplasm resources based on phenotypic trait classification].

The evaluation of germplasm resources is the prerequisite for the development, utilization, and conservation of Chinese medicinal resources. The selection of excellent germplasm is the key to the breeding and orderly production of Pinellia ternata. In this study, 21 germplasm materials of P. ternata from major production areas in China were collected and analyzed for population diversity after phenotypic preliminary screening. The results have revealed that the P. ternata population has abundant phenotypic variation, and the phenotypic changes could be divided into five phenotypes in terms of organ trait variation. Further analysis of variation in 20 quantitative traits of the population revealed that the coefficient of variation for adenosine content(339.05%) was the largest, while the coefficient of variation for the underground plant height(16.35%) was the smallest. Correlation analysis showed that there was a strong correlation among various traits, with 52 pairs of traits showing highly significant correlation(P<0.01) and 19 pairs of traits showing a significant correlation(P<0.05). The 21 germplasms in the test could be classified into three major clusters by cluster analysis, with Cluster Ⅱ having the highest number and content of nucleosides, making it suitable for the selection and breeding of P. ternata varieties with high content of nucleosides. The yield in Cluster Ⅲ was higher than that in other groups, making it suitable for the selection and breeding of P. ternata varieties with a high yield. All trait indicators could be simplified into five principal component factors through principal component analysis, and the cumulative contribution rate was up to 86.04%. Further, comprehensive analysis using membership function and stepwise regression analysis identified nine traits, such as plant height, main leaf length, and underground plant height as characteristic indicators for the comprehensive evaluation of germplasm resources of P. ternata. BX007, BX008, and BX005 were identified as germplasms with both high yield and high uridine content, with BX007 having the highest uridine content of 479.51 µg·g~(-1). It belonged to the germplasm of P. ternata with double bulbils and could be cultivated as a potential good variety. Based on the phenotypic classification of P. ternata, systematic resource evaluation was carried out in this study, which could lay a foundation for the excavation of genetic resources and the breeding of new varieties of P. ternata.

A non-destructive testing method for early detection of ginseng root diseases using machine learning technologies based on leaf hyperspectral reflectance.

Ginseng is an important medicinal plant benefiting human health for thousands of years. Root disease is the main cause of ginseng yield loss. It is difficult to detect ginseng root disease by manual observation on the changes of leaves, as it takes a long time until symptoms appear on leaves after the infection on roots. In order to detect root diseases at early stages and limit their further spread, an efficient and non-destructive testing (NDT) method is urgently needed. Hyperspectral remote sensing technology was performed in this study to discern whether ginseng roots were diseased. Hyperspectral reflectance of leaves at 325-1,075 nm were collected from the ginsengs with no symptoms on leaves at visual. These spectra were divided into healthy and diseased groups according to the symptoms on roots after harvest. The hyperspectral data were used to construct machine learning classification models including random forest, extreme random tree (ET), adaptive boosting and gradient boosting decision tree respectively to identify diseased ginsengs, while calculating the vegetation indices and analyzing the region of specific spectral bands. The precision rates of the ET model preprocessed by savitzky golay method for the identification of healthy and diseased ginsengs reached 99% and 98%, respectively. Combined with the preliminary analysis of band importance, vegetation indices and physiological characteristics, 690-726 nm was screened out as a specific band for early detection of ginseng root diseases. Therefore, underground root diseases can be effectively detected at an early stage by leaf hyperspectral reflectance. The NDT method for early detection of ginsengs root diseases is proposed in this study. The method is helpful in the prevention and control of root diseases of ginsengs to prevent the reduction of ginseng yield.

Primary Investigation of Phenotypic Plasticity in Fritillaria cirrhosa Based on Metabolome and Transcriptome Analyses.

Phenotypic plasticity refers to the adaptability of an organism to a heterogeneous environment. In this study, the differential gene expression and compositional changes in Fritillaria cirrhosa during phenotypic plasticity were evaluated using transcriptomic and metabolomic analyses. The annotation profiles of 1696 differentially expressed genes from the transcriptome between abnormal and normal phenotypes revealed that the main annotation pathways were related to the biosynthesis of amino acids, ABC transporters, and plant-pathogen interactions. According to the metabolome, the abnormal phenotype had 36 upregulated amino acids, including tryptophan, proline, and valine, which had a 3.77-fold higher relative content than the normal phenotype. However, saccharides and vitamins were found to be deficient in the abnormal phenotypes. The combination profiles demonstrated that phenotypic plasticity may be an effective strategy for overcoming potential stress via the accumulation of amino acids and regulation of the corresponding genes and transcription factors. In conclusion, a pathogen attack on F. cirrhosa may promote the synthesis of numerous amino acids and transport them into the bulbs through ABC transporters, which may further result in phenotypic variation. Our results provide new insights into the potential mechanism of phenotypic changes.

Intradural disc herniation at the L2/3 level: a case report and literature review.

BACKGROUND: Intradural lumbar disc herniation (ILDH) is special type of lumbar disc herniation in which the lumbar nucleus pulposus prolapses and enters the dura mater. ILDHs comprise 0.04-0.33% of all herniated discs. In most cases, the diagnosis could not be confirmed preoperatively by identifying the typical features of ILDH in radiological evaluation. In the current report, we present a case of ILDH at lumbar 2/3 level and discuss the clinical presentations, typical imaging features, treatments, and outcomes. CASE DESCRIPTION: We describe a rare case of ILDH. The patient was a 65-year-old man with pain in waist and back, and with bilateral radiating pain of lower extremities and fatigue for more than 2 weeks. Magnetic resonance imaging (MRI) revealed a large round, low-density mass at lumbar 2/3, which was easily mimicked as an intradural spinal tumor lesion. While enhanced MRI showed the typical rim enhancement sign and "Hawk beak" sign. Due to progressive decrease in muscle strength in both lower limbs, posterior microscopically assisted laminectomy, dural incision of the lumbar 2/3 was performed. Pathological examination revealed degenerated fibrous connective tissue and cartilage tissue. The patient's lower back pain and radiating pain and numbness of both legs improved remarkably postoperatively, and he became asymptomatic at 3 months and 1-year postoperatively. CONCLUSIONS: ILDH is a rare intervertebral disc herniation in clinical practice. The pathogenesis of ILDH may be related to aseptic inflammatory edema, closely fixing of ventral dura and the posterior longitudinal ligament, repeated mechanical action and chemical corrosion. Typical rim enhancement sign, "Hawk beak" sign and "Y" sign are important features of MRI in diagnosing ILDH, and intraspinal gas is also helpful in computed tomography (CT) diagnosis of ILDH. Prompt microscopically assisted laminectomy, dura mater incision to remove the intradural disc, pedicle screw fixation regardless of fusion, surgical results are usually favorable. We also reviewed the literature and discussed the epidemiology, potential pathogenesis, diagnosis, treatment and poor prognostic factors of ILDH.

Boosting the Cannabidiol Production in Engineered Saccharomyces cerevisiae by Harnessing the Vacuolar Transporter BPT1.

Cannabidiol (CBD), the main nonpsychoactive cannabinoid in Cannabis sativa, has diverse applications in the pharmacological, food, and cosmetic industries. The long plantation period and the complex chemical structure of cannabidiol pose a great challenge on CBD supply. Here, we achieved de novo biosynthesis of cannabidiol in Saccharomyces cerevisiae. The CBD production was further enhanced by 2.53-fold through pushing the supply of precursors and fusion protein construction. Bile pigment transporter 1 (BPT1) was the most effective transporter for transferring cannabigerolic acid (CBGA) from the cytoplasm to the vacuole, which removed the physical barrier separating CBGA and its catalytic enzyme. The lowest binding energy of the CBGA-BPT1 complex confirmed a strong interaction between BPT1 and CBGA. A CBD yield of 6.92 mg/L was achieved, which was 100-fold higher than the yield generated by the starting strain. This study provides insights into high-level CBD-producing strain construction and lays the foundation for CBD supply.

Extraction and Concentration of Waste Pueraria lobata Stems with Antioxidants and Anti-Melanogenesis Activity as a Novel Skin Whitening Agent for Natural Cosmetic Prototypes.

The root of Pueraria lobata (Willd.) is used commercially in different products, including dietary supplements, cosmetics, and teas, but its stem part is rarely used and studied. Therefore, this study evaluated the antioxidant and anti-melanogenesis activities of the bioactive fraction of P. lobata stem and investigated whether the activated carbon decolorization technique would have an impact on its activity and chemical composition. We observed that the dichloromethane fraction of P. lobata stem (DCM-PLS) has excellent antioxidant and anti-melanin synthesis activity at a concentration of 50 µg/mL. For the investigation of the anti-melanogenesis mechanism, we evaluated the mRNA expression of tyrosinase, which was depressed by the DCM-PLS. Daidzin was identified as the main active ingredient in DCM-PLS by using a high-performance liquid chromatography-diode array detector-hyphenated with tandem mass spectrometry. In addition, the activated carbon decolorization technology has no negative impact on the main components and bioactivity of DCM-PLS. DCM-PLS also did not induce any skin response in the human skin safety test. Collectively, DCM-PLS could be used as a natural type of skin-whitening agent in skin care products.